|
Führen Sie die Setup-EXE
(z. B. setup_ZUST_LD.exe) mit Administratorrechten aus! (im
Explorer Rechts-Klick auf die Setup-Exe, dann Klick auf „Als Administrator
ausführen“) |
Prüfen Sie dann,
ob das Programm läuft. Testen Sie dabei besonders die Diagramm-Grafik 2D, ggf.
3D.
Im Fall,
dass bei Aufruf der Diagramm-Grafik
Fehlermeldung oder Absturz erfolgt, ist die
manuelle Registrierung der
Grafik-Komponenten für das Merseburger Softwarepaket
vorzunehmen.
In diesem
Fall erfordern die Grafik-Komponenten olch2x8.ocx und olch3x8.ocx
für 2D-
bzw. 3D-Diagramme eine spezielle manuelle Registrierung auf Ihrem Rechner.
(Das
Standardwerkzeug RegSvr32.exe ist hier nicht wirksam.)
Das
Spezialwerkzeug für diese Registrierung ist C1regsvr.exe; es wird beim
Installationsvorgang
mittels Setup.exe
in Ihr Windows-Systemverzeichnis C:\Windows\System32 bzw.
C:\Windows\SysWOW64
kopiert – gleichzeitig mit den genannten Grafik-OCX-Komponenten.
Führen Sie
die manuelle Registrierung in folgenden Schritten durch:
Variante
A
A1. Start
> Rechtsklick auf „Eingabeaufforderung“, Klick auf „Als Administrator
ausführen“ (empfohlen)
A2. Stellen Sie im erschienenen
Eingabefenster den Pfad Ihres Windows-Systemverzeichnisses
ein (z. B. C:\Windows\System32 oder C:\Windows\SysWOW64 für ein Windows
7 / 64-Bit-System).
Verwenden Sie dazu für eine evtl. Änderung des
voreingestellten Pfades die Eingabe-Kommandos
cd.. (eine Verzeichnisebene
tiefer) und cd (Angabe des
gewünschten Verzeichnisses).
A3. Geben Sie
am Prompt der Pfadangabe folgendes Kommando ein
C1regsvr olch2x8.ocx <Enter> (falls
2D-Grafik nicht funktioniert)
und / oder
C1regsvr
olch3x8.ocx <Enter> (falls
3D-Grafik nicht funktioniert)
Beispiel:
C:\Windows\System32> C1RegSvr
olch2x8.ocx
Variante
B (wenn
„Eingabeaufforderung“ unter „Start“ nicht zur Verfügung steht)
B1. Windows-Explorer öffnen
B2. Im
Windows-Systemverzeichnis (z. B. C:\Windows\System32) cmd.exe suchen, darauf
Rechtsklick,
dann „als Administrator ausführen“
(empfohlen)
weiter mit A2./A3.
Variante
C
C1. Start
> Ausführen
C2. Eingabe
C1regsvr olch2x8.ocx <Enter> (falls 2D-Grafik nicht funktioniert)
und / oder
Eingabe C1regsvr olch3x8.ocx <Enter> (falls
3D-Grafik nicht funktioniert)
Wenn keine
Fehlermeldung erfolgt, waren die Registrierungen erfolgreich, und die
installierte
Software
sollte nun einwandfrei funktionieren.
|
Empfehlung Installieren
Sie alle gewünschten Programme des Merseburger Softwarepakets nacheinander
und nehmen Sie dann erst – falls notwendig – die oben beschriebene manuelle
Registrierung vor, da eine Installation die vorherige Registrierung einer
Grafik-Komponente wieder aufheben kann. |
Execute the Setup-EXE (e. g. setup_ZUST_LE.exe) with elevated privileges! (Right-click on Setup-Exe and select "run as Administrator". |
Check now if the program is running,
esp. check the diagram graph.
In case that the click at the diagram
graph produces an error message you have to execute the
manual registration of the graph
components of the Merseburg software package
In this case the chart components
olch2x8.ocx and olch3x8.ocx for 2D and 3D diagrams resp.
need a special manual registration (The windows standard tool regsvr32.exe
is not successful here.)
The special tool for this registration
is C1regsvr.exe; it is automatically copied in your
windows system directory C:\Windows\System32 (or C:\Windows\SysWOW64) during
the
installation process together with the above-mentioned OCX components.
Follow these steps to register the OCXs:
1. On the task bar select Start >
right-click on DOS-Prompt > select „run as administrator“
(recommended)
2. In the appearing window type the path of your Windows system
directory
(e. g.
C:\Windows\System32 or C:\Windows\SysWOW64 for a Windows 7 / 64-Bit system resp.).
Use
the commands cd.. (to change step by step to the root directory) and cd (to input the
directory).
3. At the prompt type the following
commands:
C1regSvr
olch2x8.ocx <Enter> (in case 2D-graph doesn’t work)
and / or
C1regSvr
olch3x8.ocx <Enter> (in case 3D-graph doesn’t work)
For example
C:\Windows\System32> C1RegSvr olch2x8.ocx
Alternatively follow these steps:
1. On the task bar select Start > Run
2. Type C1regsvr
olch2x8.ocx <Enter> (in case 2D-graph
doesn’t work)
and / or
Type C1regsvr olch3x8.ocx <Enter> (in case 3D-graph doesn’t work)
If no error message appears the
registration was successful.
|
Advice It is recommended first to install all
the wanted programs of the Merseburg software package and thereafter you should carry out the registration
procedure – if necessary. Each new installation procedure can
destroy your manual registration. |